WLC550-20XX Alimentatore AC/DC, con Remote ON/OFF 5 V Stand-By

Brand:
  • Safety Approval per ambito Industriale (IEC 60950-1) e medicale (IEC60601-1)
  • certificazione IEC62368-1:2018 Certified
  • Remote ON/OFF
  • Hybrid Technology Design
  • 5V in Stand-By
  • Dimensioni: 127 x 76.2 x 41,98 mm
  • 12 V Fan O/P @ 0.5 A
  • No Load Power <0.5 W
  • Potenza max: 550W
  • Efficienza sup. al 92%
  • Tensione disponibili: 12 V a 58 V DC
  • 5 Vdc Stand By Output
  • Temperatura operativa da -40 a 70 °C
  • Fino a 7 anni di garanzia
  • 12 V / 0.5 A Fan Output, Thermal Shut-Down feature

Descrizione

DESCRIZIONE

WLC550-20XX: Alimentatore AC/DC, con Remote ON/OFF 5 V Stand-By.

Il WLC550-20xx è l’evoluzione della famiglia WLC550, Alimentatore industriale con ottime caratteristiche tecniche, dimensioni compatte, potenza di uscita fino a 550 Watt con raffreddamento ad aria forzata e una efficienza fino al 92%.
L’alimentatore è caratterizzato da un ingresso universale monofase ; una potenza di uscita continua nominale fino a 550 W con raffreddamento ad aria forzata 400 LFM a 230 V CA, raffreddamento di conduzione fino a 350 W .
L’uscita principale è V1 + e le altre uscite sono + 5Vsb e + 12Vdc come alimentazione del ventilatore.

Possibilità di feature quali 5V stand by e REMOTE ON/OFF.

VANTAGGI

  • Dimensioni compatte
  • Alta efficienza
  • Controllo remoto ON/OFF
  • Uscita aux +5Vsb

WLC550: video delle caratteristiche tecniche

CARATTERISTICHE TECNICHE PRINCIPALI

CARATTERISTICHE TECNICHE PRINCIPALI
Efficiency 92% typical at full load, nominal line
Voltages measured at the PCB connector pads, 25°C ambient air, and after a 5 minute warm up.
Power FactorExceeds 0.95 with Full Load
Dimensions5 x 3 x 1.65 inches
(127 x 76.2x 42 mm)

SPECIFICHE ELETTRICHE

SPECIFICHE INPUT
Input Voltage90-264 VAC/390 VDC, Universal (Derate from 100 % at 115VAC to 78 % at 90VAC)
Input Frequency47-63 Hz
Input Current6.0 A max @ 115 VAC and 3.0 A max @ 230 VAC
No Load Power< 1.0W @ 115VAC
Inrush Current75A max
SPECIFICHE OUTPUT
Output VoltageFrom 12V to 58V (Refer model number matrix table)
Output PowerOutput Power up to 350W (Forced Air Cooled) up to 250W (Conduction Cooled) up to 150W (Convection Cooled)
Output Voltage Adjustability+/-3 %
Hold-up TimeFull Load > 16 ms typical Convection Load > 55 ms typical Conduction Load > 30ms typical
Line Regulation+/-0.5 %
Load Regulation+/-1 %
Transient Responsemax excursion 5 %; 50-100 % step load change at 0.1A/uS slew rate, 50 % duty cycle, 50/60Hz, recovery time < 5 ms.
Ripple11.0 % max for all outputs, 2 % max for 12V & 15V.
Rise Time55 ms typical
Set Point Tolerance+/-1 %
Over Current Protection>110 % of I-out Max, Hiccup mode / Auto Recovery
Over Voltage Protection110 to 140 % , Hiccup mode / Auto Recovery
Short Circuit ProtectionHiccup mode / Auto Recovery
CoolingUp to 150W max with Convection Cooled (refer Derating Curve) Up to 250W max with Conduction Cooled (refer Derating Curve) Up to 350W max with 400 LFM Forced Air Cooled (refer Derating Curve)
SPECIFICHE AMBIENTE DI LAVORO
Operating Temperature- 40 to +70°C, (-40 to 0°C startup is guaranteed with spec deviation)2
Storage Temperature-40 to +85°C
Relative Humidity5 % to 95 %, noncondensing
AltitudeOperating: 16,000 ft.; Non-operating: 40,000 ft

Di seguito puoi sfogliare l'anteprima del datasheet

Usa il menu 3D Flipbook sovrastante per sfogliare, ingrandire, vedere a schermo intero o scaricare in PDF il datasheet

INFO AGGIUNTIVE

Fornitore

Mercati

, ,

Potenza

QUOTAZIONE

Clicca di seguito per ricevere una quotazione personalizzata ed ad hoc in base a quantità e tipologia di necessità.
Sarai contattato dal referente tecnico di riferimento.

 

STANDARD LEAD TIME

Disponibilità del prodotto a 8-12 settimane.

 

DISPONIBILITÀ

Il prodotto è disponibile.

 

ORDINE URGENTE

Quando possibile (secondo disponibilità e prodotto) effettuiamo consegne “express”, per maggiori informazioni contattaci.

DOCUMENTAZIONE E LINK

Documentazione tecnica